Circuit panel: intelligent

Showing posts with label intelligent. Show all posts

Saturday, April 13, 2013

Intelligent Presence Simulator

However effective a home alarm gadget may be, it’s always better if it never goes off, and one of the most straightforward methods to ensure this is to make doable burglars think the premises are occupied. Indeed, until you personal outdated grasps or objects of great worth more probably to attract ‘professional’ burglars, it has to be stated that the majority of burglaries are dedicated by way of ‘petty’ steals who're going to be taking a look greater than the rest for simplicity and can want to interrupt into houses whose occupants are away.

Rather than simply now not occurring holiday – which is also one technique to the problem (!) – we’re going to signify building this sensible presence simulator which ought to position attainable burglars off, although your house is subjected to shut scrutiny. Like all its counterparts, the proposed circuit turns a number of milds on and off when the ambient light falls, however whereas many instruments are content to generate fastened timings, this one works using randomly variable lengths.

Circuit diagram:

$\"intelligent-presence-simulator-circuit-diagramw\"$

Intelligent Presence Simulator Circuit Diagram

So whereas different softwares are very quickly caught out just with the support of day-to-day commentary (often from a car) because of their too-perfect regularity, this one is way more credible because of the truth that its running instances are irregular. The circuit could be very easy, as we have now employed a microcontroller – a ‘little’ 12C508 from Microchip, which is greater than sufficient for this type ofn utility. It is primarys powered and makes use of rudimentary voltage regulation by using a zener diode.

A relay is used to keep watch over the gentle(s); though this is less based than a triac solution, it does avoid any interference from the primarys attaining the microcontroller, as an instance, all through thunderstorms. We mustn’t disregard this challenge must work very reliably throughout our absence, no matter happens. The ambient gentle degree is measured by a standard LDR (light established resistor), and the gentleing swaping threshold is regulateable by the use of P1 to suit the traits and placeing of the LDR.

Note that enter GP4 of the PIC12C508 shouldn't be analogue, however its good judgment switching threshold could be very suitable for this kind of use. The LED connected to GP1 point outs the circuit’s operating mode, selected by using flooring or no longer of GP2 or GP3 by implys of override swap S1. So there are three conceivable states: permanently off, completely on, and computerized mode, which is the one typically used. Given the software softwaremed into the 12C508 (‘firmware’) and the need to generate very long prolongs with the intention to arrive at lights instances or an hour or extra, it has been vital to make the MCU operate at a vastly scale backd clock frequency.

PCB Layout:

$\"pcb-layout-of-intelligent-presence-sim\"$

PCB Layout Of Intelligent Presence Simulator

In that case, a crystal-controlled clock is not appropriate, so the R-C network R5/C3 is used instead. For sure, this kind of clock source is less stable than a crystal, however then in an application like this, that may smartly be what we’re after as a degree of randomness is a design target as an alternative of a drawback. Our recommended PCB shown here takes all the elements for this project apart from after all for S1, S2, and the LDR, so as to need to be positioned on the entrance panel of the case with a objective to sense the ambient mild intensity.

The PCB has been designed for a Finder relay capable of swaping 10 A, which must show ample for lighting your home, except you reside in a replica of the Palace of Versailles. The software to be loaded into the 12C508 is available without cost obtain from the Elektor site as file number 080231-11.zip or from the author’s own web site: www.tavernier-c.com. On completion of the solder work the circuit will have to work instantly and can be checked via swaping to manual mode.

The relay should be launched within the ‘off’ position and energized in the ‘on’ position. Then all that is still is to regulate the day/night threshold via altering potentiometer P1. To do that, which you may either use a selection of patience, or else use a voltmeter – digital or analogue, but the latter will want to be digital as a manner to be high impedance – linked between GP4 and floor. When the sunshine degree below which you need the milding to be allowed to come on is reached, alter P1 to read approximately 1.4 V on the voltmeter.

If this price cannot be executed, because of the characteristics of your LDR, scale back or elevate R8 if necessary to achieve it (LDRs are identified to have quite large manufacturing tolerances). Equipped with this cheaper accent, your personal home of course hasn’t grow to be an impregnable fortress, but as a minimum it ought to seem less horny to burglars than houses which are plunged into darkness for lengthy intervals of time, especially in the center of summer season. (www.tavernier-c.com)

COMPONENTS LIST Resistors
R1 = 1k 500mW
R2 = 4k7
R3 = 560R
R4,R6 = 10k
R5 = 7k5
R 7 = LDR
R8 = 470k to 1 M
P1 = 470k potentiometer
Capacitors
C1 = 470µF 25V
C2 = 10µF 25V
C3 = 1nF5
C4 = 10nF
Semiconductors
D1,D2 = 1N4004
D3 = diode zener 4V7 400 mW
LED1 = LED, purple
D4 = 1N4148
T1 = BC547
IC1 = PIC12C508, programmed, see Downloads
Miscellaneous
RE1 = relay, 10A contact
S1 = 1-pole 3-way rotary swap
F1 = fuse one hundred mA
TR1 = Mains transformer 2x9 V, 1.2 -3 VA
4 PCB terminal blocks, 5 mm lead pitch
5 solder pins

www.ecircuitslab.com

ReadMore....

Friday, April 12, 2013

Build Intelligent Wire Loop Alarm Circuit With IC

Integrated circuit anti-theft alarm system, wire or different lack of a easy circuit. When the shortage of wires or cords lacking. MOSFET, it's working or has input voltage at pin G and for this reason it has a high current floats in the route of the pin D-S that Micro piezo siren was once so loud.

$\"Build$

Part List

R1 100K 1/2W 1% Resistor
R2, R4 10K 1/2W 1% Resistor
R3 1 Meg 1/2W 1% Resistor
C1, C3 0.1uF Ceramic Disc Capacitor
C2 0.01uF Ceramic Disc Capacitor
IC1 4001UBE Quad 2-i/p NOR Gate
Q1 MPSA14 Low Power NPN Transistor
SIREN Micro piezo siren 12V DC 150mA, 110dB @ 1M
LOOP See “Notes”

The loop can be any kind of hookup wire, with a most resistance of about 90K. Using very skinny wire (40AWG, for example) will make an awfully sensitive travel wire, but will shorten the distance it will also be strung due to the high resistance.

The siren can be changed with a relay to power external load

ReadMore....

Friday, April 5, 2013

Intelligent Trailing Switch Circuit

This is a design effective circuit in which the equipments connected at the so called trailing sockets will run only if the equipment connected at the control socket is switched on. For example, let’s connect a motor is connected to the control socket and a lamp is connected at the trailing socket. The lamp will glow only when the motor is running. This is the figure of the circuit.

Explanation of the operation circuit is when the load connected at the control circuit is switched on, the load current flows through the diodes and as a result there will a voltage drop across the diodes. This voltage drop is sufficient enough to switch on the sensitive triac T1 and the equipments connected at the trailing sockets gets power supply. The components R2 and C1 forms a snubber circuit which protects the triac from transient fluctuations. The triac T1 must be a 600V, 8A, high sensitive gate type like TIC 225M. Fit the triac with a heat sink. The maximum load that can be connected at the trailing socket is 1000W. Take at most care while handling this circuit as it is connected to 230V AC.

Almost all equipments like motors, drills, blenders, fan, old TV, radio, amplifiers etc can be connected at the control socket. In case of modern TV, computers, amplifiers, etc the power switch does not completely isolate the equipment and the equipment will draw a small amount of current in the standby mode which is sufficient enough to trigger the triac. Such equipments cannot be used on the control socket because it makes the trailing equipments ON even if the control equipment is OFF.

ReadMore....